跳转到主内容

MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement

你所需要的

  1. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement, Battery: 步骤 1 中的图像 1,1
    • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

  2. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement, RAM Shield: 步骤 2 中的图像 1,1
    • Remove the three identical Phillips screws from the memory door.

  3. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 3 中的图像 1,1
    • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

  4. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement, Upper Case: 步骤 4 中的图像 1,1
    • Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.

  5. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 5 中的图像 1,1
    • Remove the following 6 screws:

    • Two 10 mm T6 Torx screws on either side of the RAM slot.

    • Four 14.5 mm Phillips screws along the hinge.

  6. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 6 中的图像 1,1
    • Remove the four 3.2 mm Phillips screws on the port side of the computer.

  7. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 7 中的图像 1,1
    • Rotate the computer 90 degrees and remove the two 3.2 mm Phillips screws from the rear of the computer.

  8. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 8 中的图像 1,1
    • Rotate the computer 90 degrees again and remove the four 3.2 mm Phillips screws from the side of the computer.

  9. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 9 中的图像 1,1
    • Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.

    • Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case (there are some hidden plastic clips that need to be clicked off).

  10. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 10 中的图像 1,1
    • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

    • Remove the upper case.

  11. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement, Optical Drive: 步骤 11 中的图像 1,1
    • Disconnect the orange SuperDrive ribbon cable from the logic board, removing tape as necessary.

  12. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 12 中的图像 1,1
    • Remove the following 4 screws:

    • Two 3.3 mm silver Phillips screws on either side of the SuperDrive.

    • One 4.7 mm silver T6 Torx screw from the top left corner of the drive

    • One 6.2 mm black Phillips screw at the top right corner of the drive.

  13. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 13 中的图像 1,1
    • Lift the optical drive up and out of the computer.

  14. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement, PRAM Battery: 步骤 14 中的图像 1,1
    • Disconnect the PRAM battery cable from the bottom right corner of the logic board.

  15. MacBook Pro 15" Core 2 Duo Model A1211 PRAM Battery Replacement: 步骤 15 中的图像 1,1
    • Use a spudger to pry up the PRAM battery from the lower case.

    • Lift the PRAM battery out of the computer.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

iRobot

于09/24/09注册

1 声望

创作了636篇指南

一条评论

Great Guide! Thanks! Got the weakened BIOS/PRAM changed, without having to touch the m/b at all, very fine!

Pertti Vanhatalo - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 4

过去 30 天: 9

总计 25,555