修复你的物品 社区 商店

MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement

简介

This detects the light level in the room to adjust the backlit keyboard.

你所需要的

  1. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement, Battery: 步骤 1 中的图像 1，1

    • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

    翻译

  2. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement, RAM Shield: 步骤 2 中的图像 1，1

    • Remove the three identical Phillips screws from the memory door.

    翻译

  3. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 3 中的图像 1，1

    • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

    翻译

  4. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement, Upper Case: 步骤 4 中的图像 1，1

    • Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.

    翻译

  5. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 5 中的图像 1，1

    • Remove the following 6 screws:

    • Two 10 mm T6 Torx screws on either side of the RAM slot.

    • Four 14.5 mm Phillips screws along the hinge.

    翻译

  7. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 6 中的图像 1，1

    • Remove the four 3.2 mm Phillips screws on the port side of the computer.

    翻译

  8. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 7 中的图像 1，1

    • Rotate the computer 90 degrees and remove the two 3.2 mm Phillips screws from the rear of the computer.

    翻译

  9. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 8 中的图像 1，1

    • Rotate the computer 90 degrees again and remove the four 3.2 mm Phillips screws from the side of the computer.

    翻译

  10. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 9 中的图像 1，1

    • Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.

    • Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case (there are some hidden plastic clips that need to be clicked off).

    翻译

  11. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 10 中的图像 1，1

    • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

    • Remove the upper case.

    翻译

  12. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement, Left Ambient Light Sensor: 步骤 11 中的图像 1，1

    • Disconnect the left ambient light sensor cable from the logic board by placing a spudger beneath the cable and lifting up.

    翻译

  13. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 12 中的图像 1，1

    • Peel up the left ambient light sensor cable from above the left fan, removing tape as necessary.

    翻译

  14. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 13 中的图像 1，1

    • Remove the single silver Phillips screw securing the clear plastic shield over the left ambient light sensor.

    • Lift the clear plastic shield off the left ambient light sensor.

    翻译

  15. MacBook Pro 15" Core 2 Duo Model A1211 Left Ambient Light Sensor Replacement: 步骤 14 中的图像 1，1

    • Use a spudger to pry the left ambient light sensor board out of its housing on the left speaker.

    • Lift the left ambient light sensor board out of the computer.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

iRobot

于09/24/09注册

1 声望

创作了636篇指南

徽章: 36

+ 33更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 5

总计 8,337