跳转到主内容

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

你所需要的

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: 步骤 1 中的图像 1,1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 步骤 2 中的图像 1,2 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 步骤 2 中的图像 2,2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

结论

To reassemble your device, follow these instructions in reverse order.

85等其他人完成本指南。

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了16,573篇指南

7条评论

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - 回复

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - 回复

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - 回复

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 37

过去 30 天: 184

总计 64,784