跳转到主内容

简介

Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.

  1. Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

结论

To reassemble your device, follow these instructions in reverse order.

41等其他人完成本指南。

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.

glaubitz - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 13

过去的30天: 57

总计 37,165