修复你的物品 社区 商店

本指南有更多最近的更新。切换到最新的未经核实的版本。

MacBook Pro 13" Unibody Mid 2009 Logic Board Replacement

撰写者： Walter Galan (和另外10个贡献者)
  • 评论： 11
  • 收藏 1
  • 完成 1

难度

中等

步骤

13

所需时间

建议一个时间??

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

简介

This guide is an internal private guide used as a prereq.

工具

配件

没有特定配件。

  1. Grab the plastic pull tab secured to the display data cable lock, and rotate it toward the DC-in side of the computer. Pull the display data cable connector straight away from its socket, towards the DC-in side of the computer. Pull the display data cable connector straight away from its socket, towards the DC-in side of the computer.

    • Grab the plastic pull tab secured to the display data cable lock, and rotate it toward the DC-in side of the computer.

    • Pull the display data cable connector straight away from its socket, towards the DC-in side of the computer.

    翻译

  2. Remove the following two screws securing the display data cable bracket to the upper case: One 7 mm Phillips.

    • Remove the following two screws securing the display data cable bracket to the upper case:

    • One 7 mm Phillips.

    • One 5 mm Phillips.

    • Lift the display data cable bracket out of the upper case.

    翻译

  3. Use the flat end of a spudger to pry the subwoofer and right speaker connector up off the logic board.

    • Use the flat end of a spudger to pry the subwoofer and right speaker connector up off the logic board.

    翻译

  4. In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.

    • In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.

    • Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

    • This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

    翻译

  5. Use the flat end of a spudger to pry the optical drive, hard drive, and trackpad cable connectors up off the logic board. Use the flat end of a spudger to pry the optical drive, hard drive, and trackpad cable connectors up off the logic board. Use the flat end of a spudger to pry the optical drive, hard drive, and trackpad cable connectors up off the logic board.

    • Use the flat end of a spudger to pry the optical drive, hard drive, and trackpad cable connectors up off the logic board.

    翻译

  7. Use your fingernail or the tip of a spudger to flip up the cable retaining flap on the ZIF socket for the keyboard ribbon cable. Use your spudger to slide the keyboard ribbon cable out of its socket. Use your spudger to slide the keyboard ribbon cable out of its socket.

    • Use your fingernail or the tip of a spudger to flip up the cable retaining flap on the ZIF socket for the keyboard ribbon cable.

    • Use your spudger to slide the keyboard ribbon cable out of its socket.

    翻译

  8. Peel the small strip of black tape off the keyboard backlight ribbon cable socket.

    • Peel the small strip of black tape off the keyboard backlight ribbon cable socket.

    翻译

  9. Use the tip of a spudger to flip up the cable retaining flap on the ZIF socket for the keyboard backlight ribbon cable. Use your spudger to slide the keyboard backlight ribbon cable out of its socket. Use your spudger to slide the keyboard backlight ribbon cable out of its socket.

    • Use the tip of a spudger to flip up the cable retaining flap on the ZIF socket for the keyboard backlight ribbon cable.

    • Use your spudger to slide the keyboard backlight ribbon cable out of its socket.

    翻译

  10. Use the flat end of a spudger to pry the battery indicator cable connector up off the logic board.

    • Use the flat end of a spudger to pry the battery indicator cable connector up off the logic board.

    翻译

  11. Use the tip of a spudger to pry the microphone off the adhesive attaching it to the upper case.

    • Use the tip of a spudger to pry the microphone off the adhesive attaching it to the upper case.

    翻译

  12. Remove the following screws:

    • Remove the following screws:

    • Five 3.1 mm Phillips.

    • Two 3.9 mm Phillips.

    • Two 7 mm Phillips from the DC-in board.

    翻译

  13. Remove the following Tri-point screws securing the battery to the upper case: One 5.5 mm Tri-point screw.

    • Remove the following Tri-point screws securing the battery to the upper case:

    • One 5.5 mm Tri-point screw.

    • One 13.5 mm Tri-point screw.

    • Lift the battery out of the upper case.

    翻译

  14. Lift the logic board from its left edge and raise it until the ports clear the side of the upper case. Pull the logic board away from the side of the upper case and remove it, minding the DC-in board that may get caught.

    • Lift the logic board from its left edge and raise it until the ports clear the side of the upper case.

    • Pull the logic board away from the side of the upper case and remove it, minding the DC-in board that may get caught.

    • Be careful not to rip out the fragile connector plug of the microphone assembly.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去的24小时： 2

过去的7天： 2

过去的30天： 2

总计 5,415