本指南有最近更改,您可查看未经巡查的最新版本。
简介
Use this guide to replace the battery contact board.
你所需要的
-
在这个步骤中使用的工具:Magnetic Project Mat$19.95
-
Remove the following ten screws securing the lower case to the upper case:
-
Two 2.3 mm P5 Pentalobe screws
-
Eight 3.0 mm P5 Pentalobe screws
-
-
-
-
Grasp the Interposer with tweezers.
-
Lift the Interposer off the logic board and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
4等其他人完成本指南。
一条评论
when i charge my mac it will not charge and when i plug it off it will die and now show no battery status again when I plug it back and when I leave it uncharged for a while the indicator light will still be on
And it will come on
what can be the problem?