跳转到主内容

修复你的物品

维修的权力

商店

简介

This serves as the starting point for every guide—you'll need a P5 Pentalobe screwdriver to remove the lower case and get into the device.

    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

  1. Wedge your fingers between the upper case and the lower case.
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case to remove it.

  2. The lower case is connected to the upper case with two plastic clips near its center. During reassembly, gently push down the center of the lower case to reattach the two plastic clips.
    • The lower case is connected to the upper case with two plastic clips near its center.

    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

结论

To reassemble your device, follow these instructions in reverse order.

20等其他人完成本指南。

Andrew Optimus Goldheart

于2009年10月17日注册

467,197 信誉积分

创作了410篇指南

团队

iFixit iFixit 的会员

Community

133 名成员

创作了14,586篇指南

Nice………………..!

Fred Starbuck - 回复

The bottom left-middle screw on my case is jammed and won’t come out—the more I try, the more I’m stripping it. Every other screw has been removed successfully, several times, with no problems. I wonder if I put in the wrong screw from somewhere else? Any ideas for removing it?

Jordan - 回复

do i get a laptop cover for mac book pro retina a 1502 model

naga usha - 回复

do i get a macbook pro retina A 1502 MODEL laptop cover (hard or soft shell)

naga usha - 回复

I’m trying to install my lower case back but it’s refusing to clip back in. Any way I can fix it?

Jorge Ramirez-Centeno - 回复

添加评论

浏览统计数据:

过去的24小时: 14

过去的7天: 91

过去的30天: 489

总计 35,742