修复你的物品 社区 商店

MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement

简介

Use this guide to replace the battery contact board.

你所需要的

  1. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement, Lower Case: 步骤 1 中的图像 1，1
    在这个步骤中使用的工具：
    Magnetic Project Mat
    $19.95
    购买

    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

    翻译

  2. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 2 中的图像 1，1

    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case.

    • Remove the lower case and set it aside.

    翻译

  3. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 3 中的图像 1，3 MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 3 中的图像 2，3 MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 3 中的图像 3，3

    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

    • The lower case is connected to the upper case at the center, with two plastic clips.

    翻译

  5. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement, Battery Connector: 步骤 4 中的图像 1，1

    • Remove the plastic cover adhered to the battery contact board.

    翻译

  6. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 5 中的图像 1，1

    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

    翻译

  7. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 6 中的图像 1，2 MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 6 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

    翻译

  8. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 7 中的图像 1，1

    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

    翻译

  9. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 8 中的图像 1，2 MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement: 步骤 8 中的图像 2，2

    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

    翻译

  10. MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement, Battery Contact Board: 步骤 9 中的图像 1，2 MacBook Pro 13" Retina Display Early 2013 Battery Contact Board Replacement, Battery Contact Board: 步骤 9 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Grasp the Interposer with tweezers.

    • An interposer is the name for an interface that links one electrical connection to another. In this repair, it is the board connecting the battery to logic board.

    • Lift the Interposer off the logic board and remove it.

    • Removing this board will ensure that the battery remains disconnected throughout your repair, preventing your computer from accidentally powering on. It's also a good idea to take it out so it doesn't fall out unexpectedly.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

作者

与4其他贡献者

Sam Goldheart

于10/18/12注册

471,831 声望

创作了538篇指南

徽章: 48

+ 45更多徽章

团队

iFixit iFixit 的会员

Staff

118 名成员

创作了19,631篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 7

过去 30 天： 49

总计 8,625