跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

MacBook Core Duo LCD Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. MacBook Core Duo LCD Assembly Replacement, LCD Assembly: 步骤 1 中的图像 1,2 MacBook Core Duo LCD Assembly Replacement, LCD Assembly: 步骤 1 中的图像 2,2
    • Remove the small piece of foam tape stuck down above each of the bezel covers.

  2. MacBook Core Duo LCD Assembly Replacement: 步骤 2 中的图像 1,2 MacBook Core Duo LCD Assembly Replacement: 步骤 2 中的图像 2,2
    • Use a spudger to slide the left bezel cover towards the LCD panel.

    • Do not lift up vertically on the cover! Unlike the large display bezel, this one has horizontal hooks to keep it in place. These will break easily.

    • Lift the left bezel cover off the display assembly.

  3. MacBook Core Duo LCD Assembly Replacement: 步骤 3 中的图像 1,2 MacBook Core Duo LCD Assembly Replacement: 步骤 3 中的图像 2,2
    • Use a spudger to slide the right bezel cover toward the LCD panel.

    • Lift the right bezel cover off the display assembly.

  4. MacBook Core Duo LCD Assembly Replacement: 步骤 4 中的图像 1,2 MacBook Core Duo LCD Assembly Replacement: 步骤 4 中的图像 2,2
    • Lift the inverter out of the display slightly and disconnect the backlight cable from its right side.

    • Place the inverter back down in its recess.

  5. MacBook Core Duo LCD Assembly Replacement: 步骤 5 中的图像 1,1
    • Remove the single 3.2 mm Phillips screw securing the display data cable to the right clutch hinge.

  6. MacBook Core Duo LCD Assembly Replacement: 步骤 6 中的图像 1,1
    • Move the display data cable out from under the mounting arm of the right clutch hinge.

  7. MacBook Core Duo LCD Assembly Replacement: 步骤 7 中的图像 1,1
    • Remove the twelve 4.2 mm Phillips screws securing the LCD assembly to the rear display bezel.

    • Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws nearest to the bottom of the screen (on both left and right). It's easy to damage the cables if not routed properly when putting these screws back on.

  8. MacBook Core Duo LCD Assembly Replacement: 步骤 8 中的图像 1,1
    • Lift the LCD assembly out of the rear display bezel, minding any cables that may get caught.

  9. MacBook Core Duo LCD Assembly Replacement: 步骤 9 中的图像 1,1
    • Be sure to keep track of the small magnet along the left side of the display. It may be stuck to the LCD frames or to the rear display bezel. When installing it, be sure short side is facing upward.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 445