跳转到主内容

简介

This keeps the RAM levers out of the way of the battery and secures the hard drive.

  1. Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
    • Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.

  2. Lift the battery out of the computer.
    • Lift the battery out of the computer.

  3. Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.
    • Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

    • The screws are captive to the metal memory cover so you cannot lose them.

    • Using The Flexible Extension sold by iFixit will help with this step.

  4. Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.
    • Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.

    • Lift the memory cover up and out of the computer.

结论

To reassemble your device, follow these instructions in reverse order.

54等其他人完成本指南。

iRobot

于2009年09月24日注册

1 信誉积分

创作了646篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 23

总计 33,819