跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. , 底壳: 步骤 1 中的图像 1,1
    • 移除将底壳与Air相固定的10颗螺丝。

    • 6颗2.8mm 十字螺丝。

    • 2颗3.8mm 十字螺丝。

    • 2颗5.4mm 十字螺丝。

  2. : 步骤 2 中的图像 1,2 : 步骤 2 中的图像 2,2
    • 稍稍从通风口附近提起,将其推向计算机的后部以释放安装卡舌。

  3. , 电池: 步骤 3 中的图像 1,1
    • 径直将电池连接头从插座中拔出来断开连接。

  4. : 步骤 4 中的图像 1,1
    • 移除下列9颗将电池与Air相固定的螺丝。

    • 4颗2.9mm 十字螺丝。

    • 4颗3.8mm 十字螺丝。

    • 1颗7.2mm 十字螺丝。

  5. : 步骤 5 中的图像 1,1
    • 将电池从Air中取出。

    • 在你使用的电池之前先 校准 它:

    • 充电至100%,然后继续充电至少2小时。然后,拔下并正常使用以排空电池。当您看到低电量警告时,请保存你的工作,并保持笔记本电脑一直打开,直到它因电池电量不足而进入睡眠状态。等待至少5个小时,然后不间断地将笔记本电脑充电至100%。

    • 在你安装好你的新电池之后,如果你注意到任何不寻常的举动或是问题,你可能需要重置你MacBook Pro的SMC

  6. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 6 中的图像 1,1
    • Remove the following two screws securing the speaker assembly to the upper case.

    • One 3 mm Phillips.

    • One 5.8 mm Phillips.

  7. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 7 中的图像 1,2 : 步骤 7 中的图像 2,2
    • Use a spudger to lift the audio-out connector board off the adhesive that secures it to the hard drive bracket.

    • Disconnect the audio out connector from its socket.

  8. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 8 中的图像 1,2 : 步骤 8 中的图像 2,2
    • Rotate the speaker assembly toward the center of the Air.

    • Use a spudger to pry the speaker cable connector up off the audio board.

  9. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 9 中的图像 1,2 : 步骤 9 中的图像 2,2
    • Disconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.

    • If necessary, pull the audio out ribbon cable off the adhesive securing it to the upper case.

  10. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 10 中的图像 1,2 : 步骤 10 中的图像 2,2
    • Remove the four 3.2 mm Phillips screws securing the port hatch assembly to the upper case.

    • Lift the port hatch assembly out of the upper case.

终点

7等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 19

总计 15,100