跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. , 底壳: 步骤 1 中的图像 1,1
    • 移除将底壳与Air相固定的10颗螺丝。

    • 6颗2.8mm 十字螺丝。

    • 2颗3.8mm 十字螺丝。

    • 2颗5.4mm 十字螺丝。

  2. : 步骤 2 中的图像 1,2 : 步骤 2 中的图像 2,2
    • 稍稍从通风口附近提起,将其推向计算机的后部以释放安装卡舌。

  3. , 电池: 步骤 3 中的图像 1,1
    • 径直将电池连接头从插座中拔出来断开连接。

  4. : 步骤 4 中的图像 1,1
    • 移除下列9颗将电池与Air相固定的螺丝。

    • 4颗2.9mm 十字螺丝。

    • 4颗3.8mm 十字螺丝。

    • 1颗7.2mm 十字螺丝。

  5. : 步骤 5 中的图像 1,1
    • 将电池从Air中取出。

    • 在你使用的电池之前先 校准 它:

    • 充电至100%,然后继续充电至少2小时。然后,拔下并正常使用以排空电池。当您看到低电量警告时,请保存你的工作,并保持笔记本电脑一直打开,直到它因电池电量不足而进入睡眠状态。等待至少5个小时,然后不间断地将笔记本电脑充电至100%。

    • 在你安装好你的新电池之后,如果你注意到任何不寻常的举动或是问题,你可能需要重置你MacBook Pro的SMC

  6. , 硬盘: 步骤 6 中的图像 1,3 , 硬盘: 步骤 6 中的图像 2,3 , 硬盘: 步骤 6 中的图像 3,3
    • 通过其黑色拉片将其直接向上拉动,将端口带状电缆从逻辑板上断开。

    • 将音频输出带状电缆从固定在上盖上的胶带上拉出。

    • 使用撬棒将音频输出带状电缆连接器板从硬盘驱动器支架上撬出。

  7. : 步骤 7 中的图像 1,1
    • 断开插座上的音频线缆。

  8. : 步骤 8 中的图像 1,1
    • 使用撬棒来将硬盘线缆连接头从逻辑板上撬起。

  9. : 步骤 9 中的图像 1,2 : 步骤 9 中的图像 2,2
    • 使用撬棒锋利的一端,来将麦克风线缆从硬盘支架上挑起。

    • 移除覆盖着螺丝的橡胶垫。 其被粘合剂与硬盘支架相固定。

  10. : 步骤 10 中的图像 1,1
    • 移除将硬盘组件与顶壳相固定的四颗十字螺丝。

    • 2颗4.7mm 螺丝。

    • 2颗 3.9mm 螺丝。

  11. : 步骤 11 中的图像 1,1
    • 从顶壳上取出硬盘组件。

  12. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 12 中的图像 1,1
    • Use the tip of a spudger to pull the fan cable connector straight away from its connector on the logic board.

  13. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 13 中的图像 1,2 : 步骤 13 中的图像 2,2
    • Use the tip of a spudger to move the cosmetic fan cover aside.

  14. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 14 中的图像 1,2 : 步骤 14 中的图像 2,2
    • If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:

    • One 5.9 mm Phillips screw.

    • Two 1.9 mm Phillips screws.

    • One 1.9 mm Phillips screw.

    • If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:

    • One 5.0 mm Phillips screw

    • Five 1.9 mm Philips screws.

    • One 2.5 mm Phillips screw.

  15. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 15 中的图像 1,1
    • Lift the processor clamp off the heat sink.

  16. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 16 中的图像 1,1
    • Deroute the microphone cable away from the channel in the fan.

  17. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 17 中的图像 1,1
    • Lift the heat sink up off the logic board.

    • Be mindful of the microphone cable when lifting the heat sink, as it can get tangled on the top edge of the fan.

    • When you mount the heat sink back onto the logic board, be sure to apply a new layer of thermal paste. We have a guide that makes replacing the thermal paste easy.

终点

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 3,666