跳转到主内容

修复你的物品

维修的权力

商店

简介

Prereq to disconnect the battery.

配件

没有特定配件。

  1. In this step you will disconnect the battery to help avoid shorting out any components during service. Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.
    • In this step you will disconnect the battery to help avoid shorting out any components during service.

    • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

    • Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket.

结论

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

于2012年10月18日注册

434,507 信誉积分

创作了547篇指南

团队

iFixit iFixit 的会员

Community

135 名成员

创作了15,004篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 50