跳转到主内容

修复你的物品

维修的权力

商店

简介

Use this guide to remove or replace a dented lower case.

    • Shut down and close your computer. Lay it on a soft surface top-side down.

    • Remove the following ten screws:

    • Two 8 mm 5-point Pentalobe screws

    • Eight 2.5 mm 5-point Pentalobe screws

    • The special screwdriver needed to remove the 5-point Pentalobe screws can be found here.

  1. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  2. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

结论

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

于2012年10月18日注册

427,797 信誉积分

创作了547篇指南

团队

iFixit iFixit 的会员

Community

132 名成员

创作了13,488篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 6

过去的30天: 29

总计 2,205