跳转到主内容

Mac Pro Late 2013 Interconnect Board Replacement

你所需要的

  1. Mac Pro Late 2013 Interconnect Board Replacement, Outer Case: 步骤 1 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement, Outer Case: 步骤 1 中的图像 2,2
    • Slide the lock switch to the right, to the unlocked position.

  2. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 2 中的图像 1,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 2 中的图像 2,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 2 中的图像 3,3
    • Lift the outer case straight up off the Mac Pro.

    • It may help to push down on the center of the fan while lifting the case up.

  3. Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 步骤 3 中的图像 1,3 Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 步骤 3 中的图像 2,3 Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 步骤 3 中的图像 3,3
    • Remove five 5.1 mm T10 Torx screws from around the outer perimeter of the fan assembly.

  4. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 4 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 4 中的图像 2,2
    • The fan assembly is attached to the rest of the computer by two cables on the IO board side.

    • Tilt the assembly up away from the IO board.

    • Do not try to remove the fan assembly yet, as it is still attached by two cables.

  5. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 5 中的图像 1,1
    • While supporting the fan assembly with one hand, loosen the two T8 captive screws in the fan cable bracket.

    • These screws are captive in the Mac Pro. Do not try to remove these screws from your Mac Pro.

  6. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 6 中的图像 1,1
    • Use a pair of tweezers to pull the fan cable bracket away from the fan assembly.

  7. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 7 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 7 中的图像 2,2
    • Use the flat end of a spudger to disconnect the fan assembly ribbon cable from the IO board.

  8. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 8 中的图像 1,1
    • Disconnect the fan assembly antenna cable from the IO board.

    • Remove the fan assembly from the Mac Pro.

  9. Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 步骤 9 中的图像 1,3 Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 步骤 9 中的图像 2,3 Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 步骤 9 中的图像 3,3
    • Flip the Mac Pro upside down, 180 degrees.

    • Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case.

  10. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 10 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 10 中的图像 2,2
    • Carefully lift the lower case up and remove it from the Mac Pro.

  11. Mac Pro Late 2013 Interconnect Board Replacement, Interconnect Board: 步骤 11 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement, Interconnect Board: 步骤 11 中的图像 2,2
    • Use the flat end of a spudger and a twisting motion to gently separate one side of the graphics card data connection.

  12. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 12 中的图像 1,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 12 中的图像 2,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 12 中的图像 3,3
    • Gently separate the other side as well.

    • Flip the connector up and out of the way of the graphics card.

    • Repeat this procedure on the other graphics card.

  13. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 13 中的图像 1,1
    • Remove the two 6.0 mm T8 Torx screws securing the interconnect board to the heat sink.

  14. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 14 中的图像 1,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 14 中的图像 2,3 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 14 中的图像 3,3
    • Gently walk the interconnect board straight up off the logic board's slot connection.

    • It is recommended to lift one side and then the other.

    • Do not try to remove the interconnect board from the Mac Pro yet, as it is still connected to the IO board.

  15. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 15 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 15 中的图像 2,2
    • Flip the interconnect board up and over, exposing the IO board data cable.

    • Use the same sort of twisting and spreading motion with the flat end of a spudger to separate one side of the IO board data cable.

  16. Mac Pro Late 2013 Interconnect Board Replacement: 步骤 16 中的图像 1,2 Mac Pro Late 2013 Interconnect Board Replacement: 步骤 16 中的图像 2,2
    • Use the flat end of a spudger to separate the other side of the IO board data cable.

    • Bend the cable out of the way and remove the interconnect board from the Mac Pro.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了16,579篇指南

4条评论

Why is it necessary to remove the fan?

johnsburdett - 回复

Hola necesito comprar esta placa de interconexión, donde puedo encontrarla? Saludos

RailabMac - 回复

excellent, thank you very much, I wanted to ask you where I can get this plate, what is the reference?

Asdrubal - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 11

过去 30 天: 55

总计 5,437