跳转到主内容

配件

没有特定配件。

  1. Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.
    • Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.

  2. Lift and remove the metal cover from the AirPort board bay.
    • Lift and remove the metal cover from the AirPort board bay.

  3. Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector. Remove the fan assembly ribbon cable from its ZIF socket. Remove the fan assembly ribbon cable from its ZIF socket.
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.

    • Remove the fan assembly ribbon cable from its ZIF socket.

  4. Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable. Disconnect the fan ribbon cable. Disconnect the fan ribbon cable.
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.

    • Disconnect the fan ribbon cable.

结论

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

于2009年10月17日注册

472,359 信誉积分

创作了410篇指南

团队

iFixit iFixit 的会员

Community

136 名成员

创作了15,994篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 54