本指南有最近更改,您可查看未经巡查的最新版本。
简介
Use this guide to replace the AirPort antenna array in your Mac Pro.
你所需要的
-
-
Remove five 5.1 mm T10 Torx screws from around the outer perimeter of the fan assembly.
-
-
-
-
Use the flat end of a spudger to pry the fan assembly lid up off the fan assembly.
-
Remove the fan assembly lid.
-
-
-
Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.
-
-
-
Remove the three 3.7 mm T4 screws securing the antenna array to the fan assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
3等其他人完成本指南。