跳转到主内容

简介

Prerequisite only

配件

没有特定配件。

  1. Remove the two 12 mm T6 screws from the fan.
    • Remove the two 12 mm T6 screws from the fan.

    • Loosen the 27 mm T6 captive screw.

  2. The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved. Do not attempt to remove the fan entirely. Lift the fan straight up to free the captive screw from its hole in the logic board.
    • The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved.

    • Do not attempt to remove the fan entirely.

    • Lift the fan straight up to free the captive screw from its hole in the logic board.

    • Pull the fan away from the SSD until you can easily access the fan connector.

  3. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.
    • Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.

  4. Remove the fan from the Mac mini.
    • Remove the fan from the Mac mini.

结论

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

于2012年10月18日注册

439,527 信誉积分

创作了547篇指南

团队

iFixit iFixit 的会员

Community

138 名成员

创作了16,439篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 187