跳转到主内容

简介

Use this guide when you want to replace and/or recycle your battery.

  1. Make sure that the laptop is turned off before starting.
    • Make sure that the laptop is turned off before starting.

    • Place laptop with the bottom plate facing up.

  2. Remove all screws using  the JIS #1 screwdriver.
    • Remove all screws using the JIS #1 screwdriver.

  3. Remove the back plate.
    • Remove the back plate.

    • Locate the battery.

  4. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  5. Locate the foil connector above the battery.
    • Locate the foil connector above the battery.

  6. Flip up both black clips with your spudger.
    • Flip up both black clips with your spudger.

  7. Remove the foil connector by pulling on the blue tabs.
    • Remove the foil connector by pulling on the blue tabs.

  8. After the foil connector is removed you will see an 8 pin connector.
    • After the foil connector is removed you will see an 8 pin connector.

    • Disconnect the 8 Pin connector.

  9. Lift the battery and remove.
    • Lift the battery and remove.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Billy Faulconer

于2018年03月21日注册

309 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 8

过去的7天: 49

过去的30天: 200

总计 2,592