跳转到主内容

你所需要的

  1. MSI GP62MVR 6RF Leopard Pro Fans Replacement, Bottom Cover: 步骤 1 中的图像 1,2 MSI GP62MVR 6RF Leopard Pro Fans Replacement, Bottom Cover: 步骤 1 中的图像 2,2
    • Place the laptop upside down.

    • Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.

  2. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 2 中的图像 1,2 MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 2 中的图像 2,2
    • Use the Jimmy tool to evenly pry loose the bottom cover.

    • Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.

  3. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 3 中的图像 1,1
    • Remove the back cover.

    • Touching circuitry could damage components or result in personal shock; it is recommended that you now wear latex gloves to prevent both issues.

  4. MSI GP62MVR 6RF Leopard Pro Fans Replacement, Fans: 步骤 4 中的图像 1,2 MSI GP62MVR 6RF Leopard Pro Fans Replacement, Fans: 步骤 4 中的图像 2,2
    • Remove the eight 4.5 mm screws that hold the heat sink to the motherboard with a Phillips #0 screwdriver.

    • Remove the four 4.5 mm screws holding the fan in place also using a Phillips #0 screwdriver.

    • Watch for the screw hidden under the wires highlighted in the second picture.

  5. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 5 中的图像 1,2 MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 5 中的图像 2,2
    • Disconnect both power cables for the fans.

    • Make sure to pinch the power cables. It may require a bit of force.

  6. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 6 中的图像 1,3 MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 6 中的图像 2,3 MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 6 中的图像 3,3
    • Using the Jimmy tool, remove the adhesive pads securing the fans to the board.

  7. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 7 中的图像 1,1
    • Remove the black adhesive.

  8. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 8 中的图像 1,1
    • Separate the heat sink from the tab on the side holding the fan in place.

  9. MSI GP62MVR 6RF Leopard Pro Fans Replacement: 步骤 9 中的图像 1,1
    • Remove the three 3.5 mm screws on each fan holding the fan to the heat sink using a Phillips #0 screwdriver.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 5

过去 30 天: 39

总计 818