跳转到主内容

你所需要的

  1. MSI GP60 2PE Leopard Wireless Card Replacement, Battery: 步骤 1 中的图像 1,1
    • Flip MSI GP60 2PE Leopard, so that the back is facing up.

  2. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 2 中的图像 1,1
    • Find the unlock tab located on the upper right side of the device, then slide it to the right.

  3. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 3 中的图像 1,3 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 3 中的图像 2,3 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 3 中的图像 3,3
    • Slide and hold the release tab on the left side of the battery, so that you can remove the battery.

  4. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 4 中的图像 1,3 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 4 中的图像 2,3 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 4 中的图像 3,3
    • While holding the release tab, remove the battery slowly.

  5. MSI GP60 2PE Leopard Wireless Card Replacement, Back Panel: 步骤 5 中的图像 1,1
    • Flip the device over so the back is facing up.

  6. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 6 中的图像 1,2 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 6 中的图像 2,2
    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

  7. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 7 中的图像 1,2 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 7 中的图像 2,2
    • Once all four screws are removed, lift the back off.

  8. MSI GP60 2PE Leopard Wireless Card Replacement, Wireless Card: 步骤 8 中的图像 1,1
    • Locate the wireless card.

  9. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 9 中的图像 1,1
    • Using a Phillips #00 screwdriver, remove the one 2 mm screw that is holding the wireless card in place.

  10. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 10 中的图像 1,1
    • Carefully remove the wireless card.

    • Pay close attention to the two wires attached to wireless card.

  11. MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 11 中的图像 1,2 MSI GP60 2PE Leopard Wireless Card Replacement: 步骤 11 中的图像 2,2
    • Remove the wires connecting to the wireless card by pinching around the base where they connect, then carefully disconnect them.

    • The wires should come off fairly easily.

    • Avoid yanking or pulling too hard. This can result in the wires breaking.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 17

总计 1,091