M3D Micro Z Axis Belt Replacement

简介

This guide will show how to open the device and remove the z-axis belt. This is the largest belt that goes around all 4 of the threaded z-axis rods at each corner of the printer. While no tools are required for this process, care needs to be taken in order to keep the Z rods vertical to ensure proper realignment of the belt and easy reassembly.

步骤 1 M3D Micro Frame Removal

M3D Micro Z Axis Belt Replacement, M3D Micro Frame Removal: 步骤 1 中的图像 1，1

Removing the frame is necessary to access the z axis belt, motors and ports. Make sure the unit is unplugged and set on a hard level surface.

编辑

步骤 2

M3D Micro Z Axis Belt Replacement: 步骤 2 中的图像 3，3

Pull the x-rods away from the plastic sliders on the y-rods, and flip the slider upwards to release the tracks. Lift the extruder assembly out of the way.

编辑

步骤 3

No tools are required to remove the frame. Press down on the printing bed with your thumbs while lifting the frame with your fingers. The frame easily slides up.

编辑