跳转到主内容
  1. Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.
    • Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.

  2. Lift the handle on the D-ring and unscrew it. Remove the D-ring.
    • Lift the handle on the D-ring and unscrew it.

    • Remove the D-ring.

  3. Any repairs made from this point forward will void your device's warranty.
    • Any repairs made from this point forward will void your device's warranty.

    • Holding the speaker upright, wedge the metal spudger in between the casing and the speaker. Gently pry open the tabs as they are easily broken.

  4. Find the part of the casing that covers the volume controls. Wedge the metal spudger under this and pry open all of the tabs as in the previous step. Repeat for the bottom of the speaker and pry the casing open with your fingers. Repeat for the bottom of the speaker and pry the casing open with your fingers.
    • Find the part of the casing that covers the volume controls. Wedge the metal spudger under this and pry open all of the tabs as in the previous step.

    • Repeat for the bottom of the speaker and pry the casing open with your fingers.

  5. Using the Phillips J0 head screwdriver, unscrew the four silver 9 mm screws. Do the same for the two black 7 mm screws.
    • Using the Phillips J0 head screwdriver, unscrew the four silver 9 mm screws.

    • Do the same for the two black 7 mm screws.

  6. This next step involves the use of a hot soldering iron. Remember to be careful during this step since it can be easy to burn yourself. Using a soldering iron, de-solder the two ends of the switch plate. Using a soldering iron, de-solder the two ends of the switch plate.
    • This next step involves the use of a hot soldering iron. Remember to be careful during this step since it can be easy to burn yourself.

    • Using a soldering iron, de-solder the two ends of the switch plate.

  7. With the switch plate disconnected, remove it and your device should now look like this.
    • With the switch plate disconnected, remove it and your device should now look like this.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Jose Cruz Arinaga

于2015年10月01日注册

776 信誉积分

创作了3篇指南

团队

Cal Poly, Team 4-1, Maness Fall 2015 Cal Poly, Team 4-1, Maness Fall 2015 的会员

CPSU-MANESS-F15S4G1

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 13

过去的30天: 80

总计 9,132