修复你的物品 社区 商店

Logitech MBJ58 Mouse Button Replacement

你所需要的

  1. Logitech MBJ58 Mouse Button Replacement, Mouse button: 步骤 1 中的图像 1，1

    • Unfortunately, the left mouse button was 2x "sucked out" (button & the plastic pin over it)

    • Solution: Swap the button on the left with the mouse wheel button and - n small piece of office clip - for reinforcement - melt into the bottom of the pen.

    • YahooOoO - Looift widerer! Addendum: "mouse wheel click" Works by the way also - because there small springs ensure that the button does not "stick" in the pressed state

    翻译

    • Loosen the Phillips screw in the bottom.

    翻译

    • The plastic holder of the mouse buttons is loosened by carefully pressing the two plastic closures in the middle.

    • The motherboard is just plugged in and can be carefully removed forwards and upwards.

    翻译

    • Sensibly, first clean everything (dry).

    • Now click the button for "Links" with the button below the mouse wheel. The solder joints are huge and easy to get even for beginners.

    翻译

    • Everything should click together again and screws can be screwed back in. -> Loooift.

    翻译
结论

Repeat the steps in reverse order to reassemble your device.

另外一个人完成了本指南。

由衷感谢以下译者：

de en

100%

Corey Meyer

Annika Faelker

tayola

这些译者帮助我们修补全世界！ 您也想加入吗？
开始翻译 ›

作者

与1其他贡献者

Tho. Hummet

于04/05/18注册

121 声望

撰写一个指南

徽章: 2

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 9

总计 299