Logitech Harmony Touch Buttons Replacement

简介

Follow this guide if you are preparing to replace or clean your Logitech Harmony Touch's buttons.

The buttons on the remote controller have essential functions to the user's entertainment system, including the on/off, volume control, menu, and more controls that need the buttons to function.

The Logitech Harmony Touch User Manual provides a full breakdown of each button and its location on the controller if a button goes missing or you want a clear image of the remote after the teardown.

你所需要的

步骤 1 Buttons

Logitech Harmony Touch Buttons Replacement, Buttons: 步骤 1 中的图像 1，3

Logitech Harmony Touch Buttons Replacement, Buttons: 步骤 1 中的图像 2，3

Logitech Harmony Touch Buttons Replacement, Buttons: 步骤 1 中的图像 3，3

Open the latch that accesses the charging port.
Remove the black sticker and the screw with the Phillips #0 Screwdriver.
Take the plastic opening tool and run it down the side of the remote to open the case.
While doing this step, three wires connect the two pieces, be sure not to rip them out.
Detach the white clamp to disconnect the case from the motherboard partially.

编辑

步骤 2

Logitech Harmony Touch Buttons Replacement: 步骤 2 中的图像 3，3

Peel back the thin yellow plastic film.
Detach the clip found underneath the film.
Remove the screws that connect the motherboard to the case with the Phillips #0 Screwdriver.