Logitech Harmony Companion Remote Motherboard Replacement

简介

The motherboard is a central part in the operation of your Companion remote. If your remote is not working after adjusting the settings and replacing the battery, you may need to replace the motherboard. All you need for this guide is a plastic opening tool and a Phillps #0 screwdriver.

你所需要的

步骤 1 Remote Battery

Logitech Harmony Companion Remote Motherboard Replacement, Remote Battery: 步骤 1 中的图像 1，1

Hold the remote with the Logitech label toward you.

翻译

步骤 2

Push the battery cover upward.

翻译

步骤 3

Logitech Harmony Companion Remote Motherboard Replacement: 步骤 3 中的图像 3，3

Use your finger to lift the battery out of the compartment.
When the battery has lifted, push it up to remove it.

翻译

步骤 4 Remote Motherboard

Logitech Harmony Companion Remote Motherboard Replacement, Remote Motherboard: 步骤 4 中的图像 1，2

Logitech Harmony Companion Remote Motherboard Replacement, Remote Motherboard: 步骤 4 中的图像 2，2

Remove the two 5.0 mm Phillips #0 screws.

翻译

步骤 5

Use the plastic opening tool to pry open the back cover of the remote.
It is recommended to have the point of the opening tool facing the back of the remote.
Insert the opening tool on each side of the bottom of the remote, and pull up until you hear the cover click open.
Pry the back cover off by sliding the plastic opening tool down each side.