修复你的物品 社区 商店

Logitech G920 Driving Force Back Pedals Replacement

简介

This replacement guide will help you in replacing a faulty or broken back pedal on the Logitech G920 Driving Force. The following steps can be used for any of the three pedals that need to be replaced.

你所需要的

  1. Logitech G920 Driving Force Back Pedals Replacement, Back Pedals: 步骤 1 中的图像 1，1

    • Locate the pedal you need to replace.

    编辑

  2. Logitech G920 Driving Force Back Pedals Replacement: 步骤 2 中的图像 1，1

    • Use a Hex 2.5 screwdriver or Allen key to remove the two 30 mm center screws in the pedal.

    编辑

  3. Logitech G920 Driving Force Back Pedals Replacement: 步骤 3 中的图像 1，1

    • Remove the pedals from their stand.

    • Repeat steps 2-3 until all pedals needing replacement are removed.

    编辑

  4. Logitech G920 Driving Force Back Pedals Replacement: 步骤 4 中的图像 1，2 Logitech G920 Driving Force Back Pedals Replacement: 步骤 4 中的图像 2，2

    • Remove the 12 12mm screws from the bottom of the device using a Phillips #1 screwdriver.

    编辑

  6. Logitech G920 Driving Force Back Pedals Replacement: 步骤 5 中的图像 1，1

    • Remove the eight 12 mm screws from the bottom of the device with a Phillips #0 screwdriver.

    编辑

  7. Logitech G920 Driving Force Back Pedals Replacement: 步骤 6 中的图像 1，3 Logitech G920 Driving Force Back Pedals Replacement: 步骤 6 中的图像 2，3 Logitech G920 Driving Force Back Pedals Replacement: 步骤 6 中的图像 3，3

    • Push down the switch found in the hole at the top of the underside of the pedal board.

    • This opens the carpet-hold to access more screws.

    编辑

  8. Logitech G920 Driving Force Back Pedals Replacement: 步骤 7 中的图像 1，1

    • Remove the two 14 mm screws behind the carpet hold with a Phillips #0 screwdriver.

    编辑

  9. Logitech G920 Driving Force Back Pedals Replacement: 步骤 8 中的图像 1，2 Logitech G920 Driving Force Back Pedals Replacement: 步骤 8 中的图像 2，2

    • Remove the pedal back that matches the pedal front removed in step 3 .

    • This image is not upside down. When removing the back panel piece, the lettering on the inner pedal mechanism will appear this way.

    编辑

  10. Logitech G920 Driving Force Back Pedals Replacement: 步骤 9 中的图像 1，2 Logitech G920 Driving Force Back Pedals Replacement: 步骤 9 中的图像 2，2

    • Remove the washer and bolt at the top of the red piece on the pedal back.

    编辑

  11. Logitech G920 Driving Force Back Pedals Replacement: 步骤 10 中的图像 1，3 Logitech G920 Driving Force Back Pedals Replacement: 步骤 10 中的图像 2，3 Logitech G920 Driving Force Back Pedals Replacement: 步骤 10 中的图像 3，3

    • Remove the red piece, spring, and block within the pedal back.

    • Replace the necessary part.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

1指南评论

My set of pedals has an issue of continuously press break pedal, any idea what it can be? When I lift them into vertical position (holl base) it stops, but the again as horizontal (ready to be use) in the games like Forza EuroTruck Assets... etc, system behave as break pedal is press.

Olaf Tomczynski - 回复

添加评论

浏览统计数据:

过去 24 小时： 6

过去 7 天： 44

过去 30 天： 166

总计 2,263