修复你的物品 社区 商店

Logitech Extreme 3D Pro Top button circuit board Replacement

简介

The top buttons and the trigger are typically the most used, meaning the dip switches could become the first to be worn. This will require replacement for full use of the joystick.

你所需要的

  1. Logitech Extreme 3D Pro Top button circuit board Replacement, Disassembly of the handle: 步骤 1 中的图像 1，1

    • Remove these three Phillips #1 screws:

    • Two 10mm screws.

    • One 7mm screw.

    翻译

  2. Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 2 中的图像 1，1

    • Using your fingers, lower the rubber boot to reveal two screws underneath the joystick.

    • Remove the two 10mm Phillips #1 screws.

    翻译

  4. Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 3 中的图像 1，2 Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 3 中的图像 2，2

    • Pull apart the joystick chassis by hand.

    • Release this clip located underneath the hand rest

    • The circuit board will be loose and may fall down.

    翻译

  5. Logitech Extreme 3D Pro Top button circuit board Replacement, Top button circuit board: 步骤 4 中的图像 1，3 Logitech Extreme 3D Pro Top button circuit board Replacement, Top button circuit board: 步骤 4 中的图像 2，3 Logitech Extreme 3D Pro Top button circuit board Replacement, Top button circuit board: 步骤 4 中的图像 3，3

    • Remove the three 7mm Phillips #1 screws from the button board.

    • Remove the button board from the plastic top.

    • When taken apart the plastic buttons can fall out.

    翻译

  6. Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 5 中的图像 1，2 Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 5 中的图像 2，2

    • Disconnect the cable from the button board.

    翻译

  7. Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 6 中的图像 1，2 Logitech Extreme 3D Pro Top button circuit board Replacement: 步骤 6 中的图像 2，2

    • Disconnect the smaller cable from the button board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Emanuel Canela

于01/25/18注册

1,297 声望

创作了7篇指南

徽章: 14

+ 11更多徽章

团队

USF Tampa, Team S7-G1, Passmore Spring 2018 USF Tampa, Team S7-G1, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S7G1

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 26

总计 2,060