Little Wonder 4 HP Honda Pro Edger 62320001 Rev B Blade Replacement

简介

Use this guide to remove or replace the blade on a Little Wonder 4 HP Honda Pro Edger 62320001 Rev B.

Before you begin, make sure the edger is switched off and the red throttle adjuster is in the disengaged position. Disconnect the spark plug.
Use a 3/4 inch socket and ratchet to remove the nut securing the blade.
Brace the left side of the blade against the ground in order to loosen the nut. Brace the right side of the blade against the ground for tightening.