跳转到主内容

Lite-On iHAS324 Chassis Replacement

你所需要的

  1. Lite-On iHAS324 Chassis Replacement, Chassis: 步骤 1 中的图像 1,2 Lite-On iHAS324 Chassis Replacement, Chassis: 步骤 1 中的图像 2,2
    • Insert a paper clip into a small hole on the right side of the faceplate bellow the disc tray.

    • There may be resistance, do not be afraid to use force.

    • The tray should then pop open.

    • Pull out the tray so that it is fully extended.

  2. Lite-On iHAS324 Chassis Replacement: 步骤 2 中的图像 1,3 Lite-On iHAS324 Chassis Replacement: 步骤 2 中的图像 2,3 Lite-On iHAS324 Chassis Replacement: 步骤 2 中的图像 3,3
    • Use a plastic opening tool to push the three tabs located on the right, left, and bottom side of the outer chassis to loosen the faceplate off.

  3. Lite-On iHAS324 Chassis Replacement: 步骤 3 中的图像 1,1
    • Pull the faceplate off the chassis.

    • Do NOT pull the faceplate all the way off the disc tray, because doing so can cause damage to the faceplate.

    • There may be resistance, do not be afraid to use force.

  4. Lite-On iHAS324 Chassis Replacement: 步骤 4 中的图像 1,1
    • Using the Phillips Head #2 screwdriver, unscrew the two 8.5 mm screws located on the bottom back of the chassis.

  5. Lite-On iHAS324 Chassis Replacement: 步骤 5 中的图像 1,1
    • Remove the bottom plate by lifting it off the device.

  6. Lite-On iHAS324 Chassis Replacement: 步骤 6 中的图像 1,1
    • Turn the device over.

    • Remove the top plate by pulling the sides and lifting the plate off.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Kayla Culpepper

于03/22/15注册

675 声望

创作了5篇指南

团队

Baylor, Team 5-9, Williams Spring 2015 Baylor, Team 5-9, Williams Spring 2015 的会员

BU-WILLIAMS-S15S5G9

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 11

总计 1,274