简介

Has your disco ball stopped rotating and turned into a weird, multi-colored lamp? Use this guide to avoid the party-foul and get that ball spinning!

配件

  1. Turn the device over so that the base is on top.
    • Turn the device over so that the base is on top.

    添加评论

  2. Peel off the piece of metal that is glued to hold the two halves of the base together.
    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

    添加评论

    • Use a pair of tweezers to crush the sides of the wirenuts.

    • The wirenuts are crimped to lock the wires in place. Usually the wires are just twisted into them.

    • Pull all of the wires out of the wirenuts.

    添加评论

    • Separate the wires that belong to the motor.

    • The wires should be small and black.

    • Remove the motor.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order, starting from step five.

另外一个人完成了本指南。

Courtney Elliott

于2014年01月14日注册

354 信誉积分

创作了3篇指南

团队

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G3

5 名成员

创作了7篇指南

Where can you find a replacement motor?

bellyjb - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 18

总计 1,302