简介

Is your disco ball not sending out groovy beams of light anymore? The most common problem is the light bulb is burnt out. This guide will teach you how to replace that light bulb, so you can get back to partying!

  1. Unplug the device to avoid injury.
    • Unplug the device to avoid injury.

    • Turn the device over, so that the base is on top.

    添加评论

  2. Compress the tab by pushing towards the center of the device with a spudger.
    • Compress the tab by pushing towards the center of the device with a spudger.

    • While compressing the tab, peel the base away from the rotating head.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • If the metal brackets come off of the sphere, put them back on the plastic piece as shown in the photo.

    添加评论

    • Unscrew the burnt-out light bulb with a counter-clockwise twist.

    • Do not apply too much pressure when unscrewing light bulb, as the light bulb may break.

    添加评论

终点

3等其他人完成本指南。

Nick Kaprielian

于2014年01月14日注册

495 信誉积分

创作了4篇指南

团队

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G3

5 名成员

创作了7篇指南

Great! Wasn't sure how to remove the base. Thank you!

derigo1957 - 回复

Saved me a headache. Couldn't figure out how to remove base. Thanks!

mccullough1251 - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 18

过去的30天: 118

总计 7,165