简介

The Linskys WAP54g is not a very complex guide and is basically composed of the outer casing and the circuit board. This guide is pretty simple but will require the removal of a few screws and prying apart the casing. Note that taking apart the casing will void your warranty for this device.

配件

无需配件。

Power down and unplug the device.
  • Power down and unplug the device.

添加评论

Start by removing the two black rubber stoppers that act as the cushions to the legs of the device.  The stoppers are located on the bottom towards the front of the device.
  • Start by removing the two black rubber stoppers that act as the cushions to the legs of the device. The stoppers are located on the bottom towards the front of the device.

添加评论

  • Once removed two small screws will be visible. With a small screwdriver unscrew the screws.

添加评论

  • Remove the blue front panel from the rest of the device. You can now see the main board.

添加评论

  • Now slide the bottom panel forward and remove it so the main board is attached to the bottom panel.

添加评论

  • From here, remove the wires and nuts connected to the back panel of the casing by pulling the nuts through the holes in the casing.

添加评论

  • Once the bottom panel is removed unscrew the screws from the main board to the bottom panel so the main board is independent of the bottom panel.

添加评论

  • From here, all of the pieces of the casing are removed and the main board is independent of the entire casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Derek Myers

于2011年10月04日注册

243 信誉积分

创作了5篇指南

团队

Cal Poly, Team 21-21, Maness Fall 2011 Cal Poly, Team 21-21, Maness Fall 2011 的会员

CPSU-MANESS-F11S21G21

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 6

总计 1,701