跳转到主内容

Lifetime 4-Foot Adjustable Table Leg Replacement

你所需要的

  1. Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: 步骤 1 中的图像 1,3 Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: 步骤 1 中的图像 2,3 Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: 步骤 1 中的图像 3,3
    • Use the 6 mm Flathead screwdriver to remove the four aluminum slotted screws located on the edges of the table.

    • Use a 5/32" Allen Wrench or 19 mm wrench to remove the two stainless 8-18 steel hex screws from the braces of the table.

  2. Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 2 中的图像 1,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 2 中的图像 2,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 2 中的图像 3,3
    • Clean any glue or adhesive from the braces and hinges before putting it into place.

    • It’s important to clear the screw holes of any material, so that the screws can fit without obstruction.

  3. Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 3 中的图像 1,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 3 中的图像 2,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 3 中的图像 3,3
    • Align the screw holes of the braces with the new leg by inserting it into the frame.

    • While aligning, make sure the new leg fits into the frame slots.

  4. Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 4 中的图像 1,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 4 中的图像 2,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 4 中的图像 3,3
    • Place the two stainless steel hex screws inside of the screw holes located on the leg, and secure each screw with your Allen key or wrench.

  5. Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 5 中的图像 1,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 5 中的图像 2,3 Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 5 中的图像 3,3
    • Screw the four slotted screws back into the frame using a 6 mm flathead screwdriver. Ensure that the entire side where the new leg is being inserted is securely connected to the table once again.

  6. Lifetime 4-Foot Adjustable Table Leg Replacement: 步骤 6 中的图像 1,1
    • Test out the table by unfolding it, and setting it up in a standing position.

    • If the leg is not aligned properly, has loose screws, or missing some screws, make the proper adjustments before using it.

结论

To reassemble your device, follow these instructions in reverse order.

Aphason Aberham

于09/11/23注册

133 声望

撰写一个指南

团队

York University, Team 1-1, O'Regan Fall 2023 York University, Team 1-1, O'Regan Fall 2023 的会员

YORK-O'REGAN-F23S1G1

1 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 10

过去 30 天: 49

总计 190