修复你的物品 社区 商店

Lenovo Vibe Z2 Pro Battery Replacement

简介

If your phone is having issues holding a charge or the battery doesn't charge, it might be time to replace your phone's battery. Find out how to replace it in this guide

你所需要的

  1. Lenovo Vibe Z2 Pro Battery Replacement, Lenovo Vibe Z2 Pro Backplate Disassembly: 步骤 1 中的图像 1，2 Lenovo Vibe Z2 Pro Battery Replacement, Lenovo Vibe Z2 Pro Backplate Disassembly: 步骤 1 中的图像 2，2

    • Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone

    编辑

  2. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 2 中的图像 1，1

    • Remove the 3.65 mm Torx head screws at the bottom of the phone.

    编辑

  3. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 3 中的图像 1，2 Lenovo Vibe Z2 Pro Battery Replacement: 步骤 3 中的图像 2，2

    • Remove the SIM card tray by pushing a pin into the hole on the side of the phone.

    编辑

  5. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 4 中的图像 1，2 Lenovo Vibe Z2 Pro Battery Replacement: 步骤 4 中的图像 2，2

    • Push the Spudger along the gap between the phone and the backplate to separate them.

    编辑

  6. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 5 中的图像 1，1

    • Carefully pull the backplate away from the phone.

    编辑

  7. Lenovo Vibe Z2 Pro Battery Replacement, Battery: 步骤 6 中的图像 1，2 Lenovo Vibe Z2 Pro Battery Replacement, Battery: 步骤 6 中的图像 2，2

    • Peel away protective the film using your hands.

    编辑

  8. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 7 中的图像 1，2 Lenovo Vibe Z2 Pro Battery Replacement: 步骤 7 中的图像 2，2

    • Remove any adhesive strips holding the battery in place gently using a fingernail or spudger.

    • The regular black nylon spudger should be used whenever possible, especially around batteries.

    编辑

  9. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 8 中的图像 1，1

    • Disconnect the orange battery ribbon cable by gently lifting with a spudger.

    编辑

  10. Lenovo Vibe Z2 Pro Battery Replacement: 步骤 9 中的图像 1，3 Lenovo Vibe Z2 Pro Battery Replacement: 步骤 9 中的图像 2，3 Lenovo Vibe Z2 Pro Battery Replacement: 步骤 9 中的图像 3，3

    • Insert a fingernail or spudger into either side of the battery and lift upward.

    • Remove the battery from phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与4其他贡献者

Bryan Sepulveda

于09/15/16注册

547 声望

创作了3篇指南

徽章: 13

+ 10更多徽章

团队

USF Tampa, Team 18-3, Blackwell Fall 2016 USF Tampa, Team 18-3, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S18G3

4 名成员

创作了12篇指南

2条评论

Where to buy such battery?

Damir Dominko - 回复

wala pa po ba dito s pinas ng bl230?

eduardo santos - 回复

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 6

过去 30 天： 12

总计 3,361