简介

Use this guide to remove the RAM (random access memory) from your device.

  1. Remove the battery by sliding forward the switch here.
    • Remove the battery by sliding forward the switch here.

    • For more info on how to remove the battery, refer to battery replacement guide.

  2. The RAM is the small square component on the back. Unscrew all screws using a diamond head screw.
    • The RAM is the small square component on the back. Unscrew all screws using a diamond head screw.

    • There are only two screws to remove as circled here.

    • The screw head used here is a JIS J00 Driver.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. On the edges of the RAM components, push each switch to the side.
    • On the edges of the RAM components, push each switch to the side.

    • The RAM chip should pop up on its own once you push each side outwards.

  5. The RAM chip should pop up on its own once the sides are pushed outwards. Gently pull on the RAM to remove.
    • The RAM chip should pop up on its own once the sides are pushed outwards.

    • Gently pull on the RAM to remove.

  6. Remove the RAM from the device.
    • Remove the RAM from the device.

结论

To reassemble your device, follow these instructions in reverse order.

Peter Gachuki

于2018年03月26日注册

558 信誉积分

创作了4篇指南

团队

UMass Dartmouth, Team S5-G7, Peak Spring 2018 UMass Dartmouth, Team S5-G7, Peak Spring 2018 的会员

UMASSD-PEAK-S18S5G7

3 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 16

总计 145