简介

The hard drive is a storage device that permanently stores information. If you have a faulty hard drive or you are upgrading it, this guide will help you replace it.

  1. Ensure the device is off and unplugged.
    • Ensure the device is off and unplugged.

    • Remove the stylus from its port and set aside.

    添加评论

  2. Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click.
    • Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click.

    • The screws will not separate from the bottom cover when loose.

    添加评论

    • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

    • Using a plastic opening tool, gently pry the bottom cover from the laptop.

    • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Place your fingers around the edges of the cover and remove it.

    添加评论

    • Pull back the plastic heat shield over the hard drive without tearing or completely removing it.

    添加评论

    • Using a Phillips screwdriver, remove the PH1 Phillips fastener and set it aside.

    添加评论

    • Using your index finger and thumb, gently pull the hard drive from its connection and remove it from the laptop.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Daniel Fernandez

于2018年02月14日注册

694 信誉积分

创作了5篇指南

团队

USF Tampa, Team S2-G3, Eyestone Spring 2018 USF Tampa, Team S2-G3, Eyestone Spring 2018 的会员

USFT-EYESTONE-S18S2G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 26

过去的30天: 97

总计 454