跳转到主内容

简介

If keys are unresponsive or the whole keyboard is unresponsive you will most likely need to replace the keyboard for your Lenovo ThinkPad T440p. Replacing the keyboard can be quite tedious but will mainly consist of unscrewing screws and using your spudger to lift and remove cables. When removing the plastic cover, remove carefully.

  1. Flip the laptop so that the back is facing up.
    • Flip the laptop so that the back is facing up.

  2. Slide the battery latches to the unlocked position. Slide the battery latches to the unlocked position.
    • Slide the battery latches to the unlocked position.

  3. Slide the battery pack out of the battery slot. Slide the battery pack out of the battery slot.
    • Slide the battery pack out of the battery slot.

  4. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws.
    • Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws.

  5. Don't remove the screws; just loosen them. Unscrew the six screws that are attached to the keyboard by using a Phillips #00 screwdriver.
    • Don't remove the screws; just loosen them.

    • Unscrew the six screws that are attached to the keyboard by using a Phillips #00 screwdriver.

  6. Use the spudger to lift the keyboard. Use the spudger to lift the keyboard. Use the spudger to lift the keyboard.
    • Use the spudger to lift the keyboard.

  7. Turn the keyboard over. Turn the keyboard over.
    • Turn the keyboard over.

  8. Use the spudger to detach the plastic protection. Use the spudger to detach the plastic protection. Use the spudger to detach the plastic protection.
    • Use the spudger to detach the plastic protection.

  9. Use the spudger to disconnect the cables. Use the spudger to disconnect the cables. Use the spudger to disconnect the cables.
    • Use the spudger to disconnect the cables.

  10. Remove the keyboard.
    • Remove the keyboard.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Christian Abad

于2019年03月20日注册

1,102 信誉积分

创作了7篇指南

团队

UMass Dartmouth, Team S6-G5, Peak Spring 2019 UMass Dartmouth, Team S6-G5, Peak Spring 2019 的会员

UMASSD-PEAK-S19S6G5

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 21

过去的30天: 58

总计 3,552