跳转到主内容

简介

This guide will show you how to locate and replace the Lenovo T431s fan. The cooling fan is what keeps your processing unit cool so the elements of your computer don’t overheat. If you are experiencing malfunction, overheat warning messages, or hot components, you might need to replace your cooling fan.

  1. Remember before starting any disassembly, to prevent electric shock or harm, disconnect from any external power source and make sure device is powered off. Use a Phillips #1 screwdriver bit to remove eight 5.0 mm screws from the back panel.
    • Remember before starting any disassembly, to prevent electric shock or harm, disconnect from any external power source and make sure device is powered off.

    • Use a Phillips #1 screwdriver bit to remove eight 5.0 mm screws from the back panel.

    • Carefully pry off the back panel using the opening tool.

  2. Use a Phillips #1 screwdriver bit and remove the four 3.0 mm screws from the heatsink. Use a Phillips #1 screwdriver bit and remove the four 3.0 mm screws from the heatsink.
    • Use a Phillips #1 screwdriver bit and remove the four 3.0 mm screws from the heatsink.

  3. Disconnect the cable attached to the fan, pulling the connector straight down. Lift and remove the fan. Lift and remove the fan.
    • Disconnect the cable attached to the fan, pulling the connector straight down.

    • Lift and remove the fan.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

一条评论

Well done. I will have a go at fixing the fan on my T430s now that I’ve seen how easy it is to do.

Jocko - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 9

总计 142