跳转到主内容

简介

Before removing the battery, make sure that the device is totally shut off and the charger is disconnected. Also, make sure that your hands are dry and you have discharged any built up static charge by touching a good ground to avoid damaging any electric components.

配件

没有特定配件。

  1. Starting at any point along the seam of the case carefully pry it open with the metal spudger, slowly working your way around the outside until the case can come apart. The second photo shows the view that should greet you once the case has been taken apart.
    • Starting at any point along the seam of the case carefully pry it open with the metal spudger, slowly working your way around the outside until the case can come apart.

    • The second photo shows the view that should greet you once the case has been taken apart.

  2. The battery is connected to the motherboard by the thin wire shown here. Detach the yellow tape.
    • The battery is connected to the motherboard by the thin wire shown here.

    • Detach the yellow tape.

  3. Gently pull out the connector from the motherboard.
    • Gently pull out the connector from the motherboard.

  4. There is double-sided tape inside the case. Remove the double-sided tape from the case. Separate the adhesive on the battery from the case.
    • There is double-sided tape inside the case.

    • Remove the double-sided tape from the case.

    • Separate the adhesive on the battery from the case.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Thanh

于2017年09月21日注册

338 信誉积分

创作了3篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 28

总计 2,114