简介

Detailed steps to dissasemble to the logic board, then usefull pictures for rest of guide. (remember to add new thermal compound if you need to remove/replace fan assembly on processor and GPU)

配件

无需配件。

  1. recommend to print out picture of the backside of the laptop and then use it as a template to place the screws on. They are many and different sizes.
    • recommend to print out picture of the backside of the laptop and then use it as a template to place the screws on. They are many and different sizes.

    • Remove all bottom screws and place on template printout.

    添加评论

  2. remove CD drive , then hard drive.
    • remove CD drive , then hard drive.

    添加评论

    • unsnap touchpad left and right.

    • lift up touchpad carefully, and disconnect touchpad.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pull keyboard gently toward yourself. and then lift up untill flex is visible.

    • use spudger to disconnect connector for keyboard.

    添加评论

    • The rest of the guide is mosly helpfull pictures...

    • Remove WLAN module by

      • unplug carefully with spudger the two RF connectors to WLAN module.

      • removw two screws holding wlan module.

      • lift up module 45 degress and pull outwards.

    添加评论

    • usefull images showing most of main assembly.

    • Removing RAM modules is usefull if the whole logic board needs to be taken out.

    • From here on , unscrew everything - carefully note where screws belong. I used Ifixit magnetic mat and some note making.

    Careful with the screw under the flexprint of the screen

    Juan Reyes - 回复

    • one more image to help you

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Carsten Dahl Hjarup

于2013年11月04日注册

792 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 11

过去的30天: 67

总计 8,511