修复你的物品 社区 商店

Lenovo Ideapad 320-15ABR Battery Replacement

撰写者： Anurag Deb (和另外4个贡献者)
  • 评论： 2
  • 收藏 1
  • 完成 14

难度

中等

步骤

8

所需时间

6 - 8 分钟

节

2

标志

0

简介

Use this guide to safely remove the battery from your Lenovo Ideapad.

For your safety, drain your Lenovo Ideapad's battery before you begin this procedure. A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured. If your battery is swollen, take extra precautions.

  1. Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Remove the single 7 mm Phillips #1 screw securing the optical drive.

    • Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

    翻译

  2. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

    • Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

    翻译

  3. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

    • Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

    翻译

  5. Use an opening tool to pry out the back cover. Use an opening tool to pry out the back cover. Use an opening tool to pry out the back cover.

    • Use an opening tool to pry out the back cover.

    翻译

  6. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop.

    • Remove the back panel by pulling it up and away from the laptop.

    翻译

  7. Remove the four 6mm screws using the Phillips #1 screwdriver.

    • Remove the four 6mm screws using the Phillips #1 screwdriver.

    翻译

  8. Disconnect the battery connector by pulling toward the battery parallel to the motherboard. Disconnect the battery connector by pulling toward the battery parallel to the motherboard.

    • Disconnect the battery connector by pulling toward the battery parallel to the motherboard.

    翻译

  9. Remove the battery.

    • Remove the battery.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

14等其他人完成本指南。

作者

与4其他贡献者

Anurag Deb

于2018年10月31日注册

868 信誉积分

创作了3篇指南

徽章: 13

+ 10更多徽章

团队

Purdue University Northwest, Team S1-G5, Hingst Fall 2018 Purdue University Northwest, Team S1-G5, Hingst Fall 2018 的会员

PNW-HINGST-F18S1G5

4 名成员

创作了19篇指南

2条评论

hi

can i change the original battery with a more powerful battery?

amin - 回复

Votre explication est très bien détaillée et très explicite. Merci beaucoup vous m'avez vraiment aidé.

Ulrich Foudjin - 回复

添加评论

浏览统计数据:

过去的24小时： 36

过去的7天： 275

过去的30天： 1,250

总计 42,448