跳转到主内容

简介

Step by step guide to replacing the Wi-Fi card in your Lenovo 110-11IBR.

  1. Unscrew the eleven 4 mm Phillips screws on the bottom of the device. Unscrew the eleven 4 mm Phillips screws on the bottom of the device.
    • Unscrew the eleven 4 mm Phillips screws on the bottom of the device.

  2. Loosen the back lid using a plastic opening tool. Lift the back lid off of the device.
    • Loosen the back lid using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Remove the battery connector using a plastic opening tool, from its socket. Remove the two pieces of tape that are holding the battery down.
    • Remove the battery connector using a plastic opening tool, from its socket.

    • Remove the two pieces of tape that are holding the battery down.

  4. Remove the five 4 mm Phillips screws. Lift the battery up and put it to the side. Lift the battery up and put it to the side.
    • Remove the five 4 mm Phillips screws.

    • Lift the battery up and put it to the side.

  5. Locate the Wi-Fi card.
    • Locate the Wi-Fi card.

  6. Disconnect the two wires that are connected to the Wi-Fi card by gently pulling them up.
    • Disconnect the two wires that are connected to the Wi-Fi card by gently pulling them up.

  7. Unscrew the one 4mm screw keeping the card in place. Unscrew the one 4mm screw keeping the card in place.
    • Unscrew the one 4mm screw keeping the card in place.

  8. Gently pull the Wi-Fi card out of place. Gently pull the Wi-Fi card out of place.
    • Gently pull the Wi-Fi card out of place.

结论

To reassemble your device, follow these instructions in reverse order.

Alex Daughters

于2017年09月20日注册

309 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 12

总计 404