跳转到主内容

简介

This guide aims to teach you how to replace the USB 2.0 and 3.5 mm headphone ports of the Lenovo Ideapad 110S-11IBR.

  1. Unscrew the eleven 4 mm Phillips screws on the bottom of the device. Unscrew the eleven 4 mm Phillips screws on the bottom of the device.
    • Unscrew the eleven 4 mm Phillips screws on the bottom of the device.

  2. Loosen the back lid using a plastic opening tool. Lift the back lid off of the device.
    • Loosen the back lid using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Remove the battery connector using a plastic opening tool, from its socket. Remove the two pieces of tape that are holding the battery down.
    • Remove the battery connector using a plastic opening tool, from its socket.

    • Remove the two pieces of tape that are holding the battery down.

  4. Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物

    Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物
  5. Remove the five 4 mm Phillips screws. Lift the battery up and put it to the side. Lift the battery up and put it to the side.
    • Remove the five 4 mm Phillips screws.

    • Lift the battery up and put it to the side.

  6. Unscrew the three 4 mm Phillips screws. Unscrew the three 4 mm Phillips screws.
    • Unscrew the three 4 mm Phillips screws.

  7. Unlatch and remove the ribbon cable. Ribbon cables can be fragile, so avoid  excessively bending it.
    • Unlatch and remove the ribbon cable.

    • Ribbon cables can be fragile, so avoid excessively bending it.

  8. Remove the card from the laptop.
    • Remove the card from the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Hollingsworth

于2017年09月20日注册

125 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 25

总计 708