跳转到主内容

Lenovo IdeaTab A2109 System Board Replacement

你所需要的

  1. Lenovo IdeaTab A2109 System Board Replacement, Battery: 步骤 1 中的图像 1,1
    • Look at the back of the tablet and locate the speakers on top of the rear cover.

    • There is a smaller indentation in the plastic cover that runs across the top of the device.

    • Wedge the plastic opening tool, under the middle of the cover as shown, then push up and the cover will pop off.

  2. Lenovo IdeaTab A2109 System Board Replacement: 步骤 2 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 2 中的图像 2,2
    • Remove SD card if present.

    • Remove two black 3mm Phillips #00 screws.

  3. Lenovo IdeaTab A2109 System Board Replacement: 步骤 3 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 3 中的图像 2,2
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Disconnect battery power connector by pinching the connector with tweezers, and sliding it out of the housing.

  4. Lenovo IdeaTab A2109 System Board Replacement: 步骤 4 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 4 中的图像 2,2
    • Remove seven black 3mm Phillips #00 screws.

    • The top right corner screw is underneath a yellow ribbon. Lift the ribbon up without disconnecting it and unscrew the screw.

  5. Lenovo IdeaTab A2109 System Board Replacement: 步骤 5 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 5 中的图像 2,2
    • Now you can take the battery out in order to either replace it or continue disassembling the device.

  6. Lenovo IdeaTab A2109 System Board Replacement, System Board: 步骤 6 中的图像 1,3 Lenovo IdeaTab A2109 System Board Replacement, System Board: 步骤 6 中的图像 2,3 Lenovo IdeaTab A2109 System Board Replacement, System Board: 步骤 6 中的图像 3,3
    • Remove two black 3mm Phillips #00 screws.

    • Remove three silver 1.8 mm Phillips #00 screws.

  7. Lenovo IdeaTab A2109 System Board Replacement: 步骤 7 中的图像 1,3 Lenovo IdeaTab A2109 System Board Replacement: 步骤 7 中的图像 2,3 Lenovo IdeaTab A2109 System Board Replacement: 步骤 7 中的图像 3,3
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Use tweezers to flip up the small black plastic locks on all four connections.

    • Carefully remove each of the exposed ribbons.

  8. Lenovo IdeaTab A2109 System Board Replacement: 步骤 8 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 8 中的图像 2,2
    • Disconnect the two speaker connectors by pinching them with tweezers and sliding them out from the system board housing.

  9. Lenovo IdeaTab A2109 System Board Replacement: 步骤 9 中的图像 1,2 Lenovo IdeaTab A2109 System Board Replacement: 步骤 9 中的图像 2,2
    • Use tweezers or your finger nail to disconnect the camera attachment by flipping up the black rectangular connector.

  10. Lenovo IdeaTab A2109 System Board Replacement: 步骤 10 中的图像 1,3 Lenovo IdeaTab A2109 System Board Replacement: 步骤 10 中的图像 2,3 Lenovo IdeaTab A2109 System Board Replacement: 步骤 10 中的图像 3,3
    • Disconnect the HDMI connection with the system board

    • Use a plastic opening tool to pry up the system board, and you will hear a pop as it comes free.

    • Slide out the system board from its housing tab on the upper right corner.

    • Pull the board slowly away from the tab, and it will pop out.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Kyle

于04/22/14注册

581 声望

创作了2篇指南

团队

Cal Poly, Team 7-19, Regan Spring 2014 Cal Poly, Team 7-19, Regan Spring 2014 的会员

CPSU-REGAN-S14S7G19

4 名成员

创作了15篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 14

总计 1,597