跳转到主内容

简介

The network adapter is attached to the motherboard on this device. The back panel of the device must be removed to reach the adapter.

  1. Remove all of the screws on the back panel with a Phillips #000 screwdriver. Turn over the device and remove the two screws on the outside of the hinges. Turn over the device and remove the two screws on the outside of the hinges.
    • Remove all of the screws on the back panel with a Phillips #000 screwdriver.

    • Turn over the device and remove the two screws on the outside of the hinges.

  2. Use a  pry tool or iFixIt Opening tool to separate the back panel from the device. Lift the back panel straight up to remove.
    • Use a pry tool or iFixIt Opening tool to separate the back panel from the device.

    • Lift the back panel straight up to remove.

  3. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter.
    • Remove the black and white wires that attach the fan to the network adapter.

  4. Remove the two screws attaching the network adapter to the motherboard. Remove the network adapter by sliding it down out of its connector.
    • Remove the two screws attaching the network adapter to the motherboard.

    • Remove the network adapter by sliding it down out of its connector.

结论

To reassemble your device, follow these instructions in reverse order.

Rebekah Harmon

于2018年01月23日注册

108 信誉积分

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 243