跳转到主内容

简介

Replacing the battery on the Lenovo Ideapad Flex4-1130 is a relatively simple task with minimal risk of damaging the device. The battery might need replacement if your device is unable to remain on for very long even after being fully charged.

  1. Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
    • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

    • Remove the ten 4mm screws from the back panel.

  2. Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
    • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

    • Do not insert the spudger too deep! This could potentially damage a device part.

  3. Remove the connector attaching the battery to the motherboard.
    • Remove the connector attaching the battery to the motherboard.

  4. Remove the four 4mm screws on the battery.
    • Remove the four 4mm screws on the battery.

  5. Lift the battery with a spudger and remove.
    • Lift the battery with a spudger and remove.

结论

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

于2018年02月15日注册

677 信誉积分

创作了5篇指南

团队

USF Tampa, Team S17-G5, Boczar Spring 2018 USF Tampa, Team S17-G5, Boczar Spring 2018 的会员

USFT-BOCZAR-S18S17G5

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 8

过去的30天: 28

总计 2,853