跳转到主内容

Lenovo IdeaPad 100s-14IBR Speaker Replacement

你所需要的

  1. Lenovo IdeaPad 100s-14IBR Speaker Replacement, Speaker: 步骤 1 中的图像 1,1
    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

  2. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 2 中的图像 1,2 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 2 中的图像 2,2
    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

  3. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 3 中的图像 1,1
    • For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.

    • Remove the six 4mm Phillips #00 screws.

    • Remove the battery using the nylon spudger.

  4. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 4 中的图像 1,2 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 4 中的图像 2,2
    • Remove the four 2mm PH00 screws.

    • Unplug the speakers from the motherboard.

    • Remove the two 4mm PH00 screws from the metal shield on the trackpad.

    • Lift the metal shield up slightly, being very careful not to move the ribbon cables too much. Move the speaker cables out from under the shield.

  5. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 步骤 5 中的图像 1,1
    • Lift the speakers from the case being careful of the wires connecting them. Put them to the side.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 4

总计 391