Lenovo IdeaPad 1 14IGL7 USB Port Replacement

简介

This is a guide on how to replace the USB port on the Lenovo IdeaPad 1 14IGL7. You may need to consult this guide when your USB devices are not connecting to your device. Please take precaution to not cause harm to the device.

你所需要的

步骤 1 Back Panel

Lenovo IdeaPad 1 14IGL7 USB Port Replacement, Back Panel: 步骤 1 中的图像 1，1

Power off your laptop before beginning disassembly.
Place the computer upside down on a flat surface.

编辑

步骤 2

Remove the nine 7 mm screws from the back panel using a Phillips #00 screwdriver.

编辑

步骤 3

Insert an opening pick between the back panel and the body of the laptop.
Pry up the latches around the back panel and remove the panel from the laptop.

编辑

步骤 4 USB Port

Lenovo IdeaPad 1 14IGL7 USB Port Replacement, USB Port: 步骤 4 中的图像 1，2

Lenovo IdeaPad 1 14IGL7 USB Port Replacement, USB Port: 步骤 4 中的图像 2，2

Gently detach each end of the cable connecting the USB port to the motherboard.

编辑

步骤 5

Carefully remove the cable from the device and set it aside.

编辑

步骤 6

Use the Phillips #00 screwdriver to remove the two 3 mm screws that hold the USB port in place.

编辑

步骤 7

Grab the right side of the USB port and gently lift it away from the device.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Nathan Costa

于03/18/24注册

348 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

UMass Dartmouth, Team 1-6, Konn Spring 2024 UMass Dartmouth, Team 1-6, Konn Spring 2024 的会员

UMASSD-KONN-S24S1G6

4 名成员

创作了5篇指南

Lenovo IdeaPad 1 14IGL7 USB Port Replacement

简介

你所需要的

步骤 1 Back Panel

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4 USB Port

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

作者

Nathan Costa

团队

UMass Dartmouth, Team 1-6, Konn Spring 2024 UMass Dartmouth, Team 1-6, Konn Spring 2024 的会员

0条评论

添加评论

嵌入本指南

预览