简介

This part requires a phillips head screwdriver to remove the screws as well as a plastic spudger.

Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
  • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

  • Make sure that the work surface is flat and has nothing sharp on it.

添加评论

Remove the monitor stand screw in the bottom of the stand, and remove the stand completely. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
  • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

添加评论

Remove the two screws on the bottom of the computer, one on each side.
  • Remove the two screws on the bottom of the computer, one on each side.

添加评论

Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
  • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

添加评论

Once it has been separated, lift to remove. Once it has been separated, lift to remove.
  • Once it has been separated, lift to remove.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Jackson Blake

于2018年01月22日注册

805 信誉积分

创作了9篇指南

团队

Cal Poly, Team S16-G3, Banghart Winter 2018 Cal Poly, Team S16-G3, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S16G3

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 28

总计 142